Flipsky V6.6 Dual FSESC6.6 Based on VESC6 w/ Aluminum Heatsink 200A ESC


Free Shipping

The product you want to order is in stock. All orders are delivered within 24 hours after they are placed.
The Flipsky ESC is based upon the VESC Open Source Project, and compatible with VESC Software. Highly modifiable electronic speed controller designed with DIY Electric Skateboards conversions in mind.The Flipsky ESC allows you to use sensorless motors to achieve smooth start-up from a stop versus traditional RC ESC's which may have trouble starting from a complete stop. It also provides strong. reliable and progressive electric braking.

Dual ESC can reach continuous 200A big current, give your board strong power.
Aluminum anodized Heat sink with fins design for better heat dissipation.
One PCBA board integrate two FSESC6's function by internal CAN BUS circuit connection.
Preserve BT module and RF module connections for both master and slave board.
The mater and slave board connection can be switched On/Off.
Motor speed, ampere hours, watt hour count,Instant data analysis and reading via communication port.
Voltage and current protection setting for Motor and ESC.
Regenerative braking; Traction control (single and dual settings); Sensor or sensorless operation.
Configurable RPM, Current, Voltage and Power Limits. Input source: PPM, simulation, NRF Nyko Kama Nunchuck; Communication ports: USB, CAN, UART, NRF, BT.
Throttle curves and ramps for all input sources; Separate acceleration and brake throttle curves.
Hardware: V6.6
Firmware: VESC_default_no_hw_limits
Voltage: 8V – 60V (Safe for 3S to 12S LiPo) for the dual ESC
Voltage spikes may not exceed 60V
Current: Continuous 100A single, total 200A ,  Instantaneous current 400A per single, total 800A for system instantaneous current.
5V 1.5A output for external electronics for single
3.3V 1A output for external electronics for single
Modes: DC, BLDC, FOC (sinusoidal)
Supported sensors: ABI, HALL, AS5047
6 shunts in dual system. Each is measurable for the current.
Weight: 320g
Size: 120 * 91 * 20mm (Include Heatsink)
Package information:
Package size: 20 * 13.5 * 11cm / 7.9 * 5.3 * 4.3in
Package weight: 430g
White box package
There might be some deviation due to manual measurement.
Package list:
1 * Dual FSESC6.6 + Aluminum Heatsink
1 * USB micro Flash Charge
1 * Manual

The product you want to order is in stock. All orders are delivered within 24 hours after they are placed.
Eien-Animes | Speechless S02E18 HDTV x264-SVA [eztv] | Connect (7)